Do You Have an Emergency Vehicle That Needs Washing?
Perfect to Wash EMS Vehicles
The Tower Wash is the perfect solution for washing emergency vehicles. With the Tower Wash, washing an emergency vehicle daily becomes a reality in a cost effective and clean way. Operator stays dry while using Tower Wash. Nobody likes to work while they’re soaking wet and with the Tower Wash, they no longer have to. Wash your emergency vehicle with Polyethylene Brushes which provides a gentle clean wash. Each strand is 0.6mm; the finer the brush, the better its ability to clean fine crevasses. The cruciform shape of the strand allows a bead of soap and bead of water to sit in the crevasse for lubricity.
The Tower Wash unit has a small footprint (16 sq. ft). A Tower Wash unit won’t take up a lot of room in your workplace. Not only that, it’s easy to push off to the side since it stands on high quality caster wheels.
Operator stays dry. Gone are the days in which your staff dreads washing the fleet. A dry employee is a happy employee. Our technicians have consulted on, designed, installed and maintained hundreds of wash bays since 1991.
Keeping dirt and salt off your EMS vehicles not only make them look better, it can also save you money for paint and body work costs as well as extending the life cycle of your fleet. Hand operated pressure systems can damage vehicle graphics and sensitive electronic connections. Tower Wash soft brushes with not damage or peel graphics. It eliminates the need for those frustrating paint touch ups and make your emergency vehicles clean, visible and safe.
“When looking for ways to save money, we found it. With our recent purchase of an ACC Eco Power Brush, no more hand washing and one less person. Saves $$$.”
“Wash unit performs outstanding. One year of daily use in a 14 coach fleet and not one problem. Cleans very well. Extremely satisfied. Would sell a bus before I sell my washer.”
“Best washer I ever owned. Washes large school buses in 4 minutes, 1 man. What a money saver on labour and water. I DON’T KNOW WHAT I WOULD DO WITHOUT THIS GREAT WASHER. I LOVE IT!”
Estimates on current usage for polyethylene is 15,000 washes (double for foam)
Any vehicles 14 feet fall and under can be washed in 5 minutes or less.
Staff stays dry and clean. Wash time requires minimal physical effort.
Yes, there are options available for rinse, degreaser, Reverse Osmosis, soft water, etc.
Less than 1 ounce of soap is used per minute.
Brushes are in 1 foot sections. It’s as easy as replacing two screws and two bolts/nuts.
Very low requirements versus any system on the market. We have service programs available on a yearly package to enable any request. Parts are all warehoused and available for immediate delivery.
Soft polyethylene brushes have been used for over 25 years with no issues. An upgrade to foam brushes is also available depending on graphics.
Machines and systems are all automated. One usage of the machine is typically the amount of training required.
No, this system is equivalent to a piece of equipment such as a pressure washer.
System only uses 3 to 5 gallons of water per minute, approximately the same as a pressure washer. Regular sewer drainage is the only requirement.
No structural changes required, only an area to install an overhead festoon system, 220V plug (single or 3 phase) and a regular city water tap.
Anywhere inside or outside your facility that has 4 feet clearance.
The Awash standard brush is polyethelene. Each strand is 0.6mm; the finer the brush, the better its ability to clean fine crevasses. The cruciform shape of the strand allows a bead of soap and bead of water to sit in the crevasse for lubricity.
Maintaining the brushes is important
Polyethelene brushes last 10,000 to 15,000 washes or 5 years; once the cruciform wears out, the strand loses lubricity. A simple test of brush replacement is to measure existing from shaft to ends. A new brush is 16” long. Flagged ends offer a better finish for the final clean. Short brushes cause strain & stress on the motor or gearbox, leading to possible burn-out.
How do you know its time for a new brush?
Check out these AWESOME videos to see how you can save on soap and water! We kind of get excited about things like this!
|Water Saving Methods||Soap Saving Methods|
7 or 8 ft Height Standard With Custom Options
32 Inch x 40 Inch Base With Sealed Casters
Durable Life Brushes Rated For Over 40,000 Washes
Full Powder Coated Aluminum Frame
Weight 330 lbs (150 kgs)
2 Year Standard Warranty (With 5 Year Option)
Non–Marking Guide Wheels
Automatic Water & Control Valves
Brass Nozzles On Steel Spray Pipes
Heavy Duty Water Approved Motor/Gearbox Assembly
110 Volt Electrical Plug
Water Activated Tilt Mechanism
Single Person Operation
A Few of Our Happy Customers
These brands trust us with their vehicles. We are sure hoping that you will the same!
We will provide you with a FREE no obligation Quote on one of our patented units.